Vendor List

From DoyleGroup
Revision as of 10:13, 23 February 2010 by Amar (Talk | contribs) (Electronics)

Jump to: navigation, search

Buyers guides

Ablation target preparation and testing

  • Applied Test Systems - high-end materials testing and furnaces
  • Futek - Load cells and other sensors
  • MTI Corporation - relatively inexpensive materials science research supplies (furnaces, temp. controllers, crucibles, gloveboxes, benchtop presses, diamond blade saws, ball mills, nanopowders...); equipment seems generally reliable, but technical support is of little help.
  • Renco Corporation - sells glovebox gloves
  • Thermo Scientific - general lab supplies, including furnaces

Radiation equipment

  • For radiation inspection, non-emergency cleanup, and radiation labels and waste bins, contact Ken Walker at first_last@harvard.edu.
  • Atlantic Nuclear - radiation safety: shielding, radiation meters, dosimetry
  • Ludlum Measurements - exhaustive assortment of survey meters
  • Canberra - radiation measurement and safety supplies, including radioisotope samples

Chemicals and materials

Ceramics

See also: #Chemicals_and_materials

Metals

See also: #Chemicals_and_materials

  • ESPI - expensive, but has everything
  • Goodfellow
  • Rembar- Good for Tantalum, Tungsten etc
  • Hagstoz - Gold and precious metals, usually cheap
  • Refining Systems - Gold and precious metals
  • Hauser and Miller - Even cheaper gold and precious metals
  • Allfoils - "UHV Aluminum Foil"
  • Sophisticated alloys
  • Parker Steel - Metric metals (not just steel). Tell Gary Bartlett that Stan sent you.
  • Copper and brass sales - THE copper and brass supplier. Doesn't always sell small quantities. Ask for Jeremy Jennings, First.last@thyssenkrupp.com
  • Sequoia Copper and Brass - Cheap copper and brass. Sells small quantities at reasonable prices, but might take a while.
  • Online Metals - Good selection, fast shipping, reasonable prices on most things. DO NOT BUY COPPER HERE... the price is inflated by a factor of 2-3 compared to Sequoia or Copper and Brass.
  • McMaster - Good selection, reasonable prices. Don't buy if you really need a specific alloy of a metal, since they never provide any sort of material certification.
  • Brunner Enterprises - Good source for anodized aluminum.
  • Turner Steel - Steel
  • Ed Fagan - Invar, Molybdenum, Tungsten, Tantalum, Nickel
  • Admiral Metals - Aluminum, S.S., brass, beryllium, copper
  • Yarde Metals - Large diameter tubes
  • Tube Service - Large diameter tubes
  • T.W. Metals - Tubing, aluminum, stainless, nickel

Plastics and Composites

Hardware

  • McMaster
  • MSC - When McMaster just won't do
  • RAM mounts - Mounts for scopes and other instruments.
  • Vlier - Screws with Springs inside and more.
  • Air Incorporated - 80/20 supplier. Phone: 800-341-2800. Best to have the cut numbers and location codes (from an 80/20 catalog) ready for any anchor fastener counterboring, etc., before you call.
  • Amazing Magnets - Permanent magnets
  • K&J Magnetics - Large selection of rare-earth magnets.

Optics

Essentials

Specialty

Laser Diodes

PMT

Hamamatsu PMT contact Rich at (908) 252-7728 Fax: (732) 537-3678

Electronics

Sensors

  • Micromagnetics Magnetoresistance-based B-field sensors
  • Honeywell Anisotropic magnetoresistance (AMR) magnetic sensors. Noise is < 1 uG/rt-Hz @ 10 Hz. ~20$ each.

Vacuum

Essentials

Specialty

Cryogenics

Gases and Flow Control

  • MKS Instruments - Flow controllers.
  • Laminar Technologies - Sells used MKS flow controllers. The Harvard cleanroom manager (Noah Clay) claims that used flow controllers are better (since they are screened for infant death), and of course they are cheaper.

Quasi-Optical, Microwaves

mm-wave Microwave Components

  • Quinstar - Large selection of waveguide and coax, ask for Sage Kuno
  • Miteq - Largest supplier (and stock) but more expensive

Optical detectors, PMTs

Coatings, deposition

Electroplating

Diamond-Turned Optics

Actuators and Motion Control

Vibration Isolation

Waterjet

Computers and Computer Hardware

  • Dell Configure computer on Dell's website, print the configuration as a PDF, make a PO, and email the PO and the configuration to Andy Meyer: first_last@dell.com
  • NewEgg Computer accessories. WARNING: they do not accept POs.
  • Dynamix Computers - Small touchscreen monitors

Office Supplies

Office Depot Fax 800-685-5010


Food, etc