EspessoMachine
From DoyleGroup
Startup
- Check the water level. The machine does not have a water level interlock, so a low water level could cause overheating.
Operation
- Clean off any pieces of equipment before putting them on the top of the machine. This includes the tamper and filter.
Cleanup
- Remove the filter, and dispose of the grounds.
- Check that the filter did not separate from the handle and end up in the trash.
- Rinse the filter by re-inserting it into the machine and hitting the "single shot" button. Have a cup underneath to catch the water.
- Rinse the filter in the sink and dry with a paper towel.
- Clean the entire area