Difference between revisions of "EspessoMachine"
From DoyleGroup
(Created page with '== Startup == * Check the water level. The machine does not have a water level interlock, so low water level could cause overheating. == Operation == * Clean off any pieces o...') |
(→Startup) |
||
Line 1: | Line 1: | ||
== Startup == | == Startup == | ||
− | * Check the water level. The machine does not have a water level interlock, so low water level could cause overheating. | + | * Check the water level. The machine does not have a water level interlock, so a low water level could cause overheating. |
== Operation == | == Operation == |
Revision as of 13:29, 13 September 2013
Startup
- Check the water level. The machine does not have a water level interlock, so a low water level could cause overheating.
Operation
- Clean off any pieces of equipment before putting them on the top of the machine. This includes the tamper and filter.
Cleanup
- Remove the filter, and dispose of the grounds.
- Check that the filter did not separate from the handle and end up in the trash.
- Rinse the filter by re-inserting it into the machine and hitting the "single shot" button. Have a cup underneath to catch the water.
- Rinse the filter in the sink and dry with a paper towel.
- Clean the entire area