Difference between revisions of "EspessoMachine"
From DoyleGroup
(→Cleanup) |
(→Cleanup) |
||
Line 11: | Line 11: | ||
# Check that the filter did not separate from the handle and end up in the trash. | # Check that the filter did not separate from the handle and end up in the trash. | ||
# Rinse the filter in the sink. | # Rinse the filter in the sink. | ||
− | # | + | # Re-insert the filter into the machine and hit the "single shot" button. Have a cup underneath to catch the water. This helps rinse out the machine. |
# Rinse the filter in the sink and dry with a paper towel. | # Rinse the filter in the sink and dry with a paper towel. | ||
# Clean the '''entire area''' | # Clean the '''entire area''' | ||
+ | # Leave the clean filter on top of the machine | ||
+ | # Empty and rinse the tray if needed. |
Revision as of 13:30, 13 September 2013
Startup
- Check the water level. The machine does not have a water level interlock, so a low water level could cause overheating.
Operation
- Clean off any pieces of equipment before putting them on the top of the machine. This includes the tamper and filter.
Cleanup
- Remove the filter, and dispose of the grounds.
- Check that the filter did not separate from the handle and end up in the trash.
- Rinse the filter in the sink.
- Re-insert the filter into the machine and hit the "single shot" button. Have a cup underneath to catch the water. This helps rinse out the machine.
- Rinse the filter in the sink and dry with a paper towel.
- Clean the entire area
- Leave the clean filter on top of the machine
- Empty and rinse the tray if needed.