Difference between revisions of "EspessoMachine"

From DoyleGroup
Jump to: navigation, search
(Startup)
(Cleanup)
Line 8: Line 8:
  
 
== Cleanup ==
 
== Cleanup ==
* Remove the filter, and dispose of the grounds.
+
# Remove the filter, and dispose of the grounds.
* Check that the filter did not separate from the handle and end up in the trash.
+
# Check that the filter did not separate from the handle and end up in the trash.
* Rinse the filter by re-inserting it into the machine and hitting the "single shot" button.  Have a cup underneath to catch the water.
+
# Rinse the filter in the sink.
* Rinse the filter in the sink and dry with a paper towel.
+
# Rinse the filter by re-inserting it into the machine and hitting the "single shot" button.  Have a cup underneath to catch the water.
* Clean the '''entire area'''
+
# Rinse the filter in the sink and dry with a paper towel.
 +
# Clean the '''entire area'''

Revision as of 13:29, 13 September 2013

Startup

  • Check the water level. The machine does not have a water level interlock, so a low water level could cause overheating.

Operation

  • Clean off any pieces of equipment before putting them on the top of the machine. This includes the tamper and filter.

Cleanup

  1. Remove the filter, and dispose of the grounds.
  2. Check that the filter did not separate from the handle and end up in the trash.
  3. Rinse the filter in the sink.
  4. Rinse the filter by re-inserting it into the machine and hitting the "single shot" button. Have a cup underneath to catch the water.
  5. Rinse the filter in the sink and dry with a paper towel.
  6. Clean the entire area